EARTHWORKS _ FW730/HC FlexWand

Contact: +84919339977

EARTHWORKS _ FW730/HC FlexWand

 

Integrated Hypercardioid Microphone, Boom & Stand for Choir Miking - EARTHWORKS _ FW730/HC FlexWand
   ■ Integrated choir miking system with 30kHz hypercardioid microphone, low profile microphone stand and boom
   ■ Wide coverage area
   ■ Near-perfect polar pattern with high rejection of sounds from the rear of the microphone
   ■ No spotlighting
   ■ Uniform frequency response on or off axis
   ■ Frequency response up to 30kHz
   ■ Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
   ■ Large flex section near the center of the stand that couples the stand and the wand
   ■ Mini-gooseneck between the end of the wand and the microphone head
   ■ Substantial improvement in gain before feedback
   ■ They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
   ■ Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
   ■ The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
   ■ The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over
   ■ Frequency Response: 100Hz to 30kHz
   ■ Polar Pattern: Hypercardioid
   ■ Sensitivity: 20mV/Pa (-34dBV/Pa)
   ■ Power Req: 24 – 48V Phantom, 10mA
   ■ Max Acoustic Input: 139dB SPL
   ■ Output: XLR (pin 2+)
   ■ Output Impedance: 65Ω balanced (between pins 2 & 3)
   ■ Min Output Load: 600Ω between pins 2 & 3
   ■ Noise: 16dB SPL equivalent (A weighted)
   ■ Positioning Range: From 1.5 ft. to 7 ft. above floor level
   ■ Dimensions: Stand (2.18m), Base (30.5cm) in diameter, (2.7cm) high
   ■ Color: Stand, flex & wand – black, base – dark gray
   ■ Weight: Stand (.9 kg), Base (5.7kg)

https://earthworksaudio.com/products/microphones/flexwand-series/fw730hc/

FW730/HC FlexWand™

Integrated Hypercardioid Microphone, Boom & Stand for Choir Miking

 

Integrated choir miking system with 30kHz hypercardioid microphone, low profile microphone stand and boom

  •  

    Wide coverage area

  •  

    Near-perfect polar pattern with high rejection of sounds from the rear of the microphone

  • No spotlighting

Description

The Earthworks FlexWand™ Series 7’ integrated microphone systems are designed for miking choirs.

Performance

When you do not want to compromise appearance for sound quality, the FW730/HC FlexWand™ provides the best of both worlds. Combining a 30kHz cardioid microphone, low profile microphone stand and boom as a single freestanding unit, the FW730/HC delivers a low profile and flexible miking solution for choirs and other applications.

Its near-perfect hypercardioid polar pattern is consistent across all frequencies, which simplifies microphone placement and and ensures more gain before feedback. With 32dB of rear rejection, it is ideal for live performances where there may be bleed from surrounding instruments.

The FW730/HC FlexWand’s wide coverage area allows for the use of fewer Earthworks microphones with better coverage and sound quality. And there is no spotlighting, so no one voice will stand out ahead of the rest. Instead, your choir will sound like a unified voice instead of a bunch of separate voices.

Beyond its improved audio performance and coverage, the FlexWand is designed with functionality in mind. The microphone head can be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between, allowing a nearly unlimited number of microphone positioning options.

Additionally, there are no visible wires or cables above floor level. Instead, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.

While designed with the needs of choirs and orchestras in mind, the FW730/HC is also highly effective for drums and percussion, electric and acoustic instruments and speech.

Construction

Standing 7’ 2” tall (2.18m) and measuring just .75 inches (19mm) at its widest point, the FW730/HC FlexWand™ provides both height and a very low profile appearance, virtually disappearing from sightlines in the congregation, audience or on camera.

The FW730/HC incorporates a large flex section near the center of the stand that couples the stand and the wand, allowing you to adjust the microphone from its tallest height at 7’ 2” (2.18m) to 1.5’ (0.45m) above the ground and anywhere in between. The mini-gooseneck between the end of the wand and the microphone head lets you precisely and quickly position the microphone for optimal coverage.

The sturdy cast iron base provides enough weight so that there is no concern of the FW730/HC FlexWand™ falling over if it is bumped into. Rather, the microphone easily stabilizes itself.

Optional 2 and 3 foot extensions available separately for added height.

Options

The FlexWand™ microphones have cast iron or tripod base options. Available in cardioid or hypercardioid. Matched pairs available.

  • Uniform frequency response on or off axis
  • Frequency response up to 30kHz
  • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
  • Large flex section near the center of the stand that couples the stand and the wand
  • Mini-gooseneck between the end of the wand and the microphone head
  • Substantial improvement in gain before feedback
  • They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
  • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
  • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
  • The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over

 

Frequency Response: 20Hz to 30kHz

Polar Pattern: Hypercardioid

Sensitivity: 20mV/Pa (-34dBV/Pa)

Power Requirements: 24 – 48V Phantom, 10mA

Max Acoustic Input: 139dB SPL

Output: XLR (pin 2+)

Output Impedance: 65Ω balanced (between pins 2 & 3)

Min Output Load: 600Ω between pins 2 & 3

Noise: 16dB SPL equivalent (A weighted)

Positioning Range: From 1.5 ft. to 7 ft. above floor level

Dimensions: Stand 7’ 2” long (2.18m), Base 12” (30.5cm) in diameter, (2.7cm) high

Color: Stand, flex & wand – black, base – dark gray

Weight: Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)

Chào đón hợp tác

Cho dù là siêu dự án hay một đơn hàng nhỏ lẻ

Chúng tôi mong được hợp tác và trân trọng cảm ơn sự tín nhiệm của Quý khách hàng!

 

Lên lịch tư vấn với chúng tôi bằng cách điền vào biểu mẫu liên hệ trực tuyến, hoặc liên hệ trực tiếp với chúng tôi theo thông tin sau đây:

 

ĐỐI TÁC CHIẾN LƯỢC MỘT ĐIỂM DỪNG CAO CẤP

➤ Tư vấn - Thiết kế - Tích hợp giải pháp công nghệ tiên tiến

➤ Nhập khẩu - Phân phối - Cung cấp hệ thống thiết bị từ nhiều thương hiệu danh tiếng hàng đầu thế giới trong lĩnh vực.

➤ Dịch vụ kỹ thuật chuyên nghiệp

 

CÔNG TY CÔNG NGHỆ BÁ HÙNG

Bá Hùng Technology Co.,

  • Địa chỉ: 7-8-9 Dãy 11A, Đường Chánh Hưng (Phạm Hùng), Phường 4, Quận 8, TP. HCM, Việt Nam
  • Site: https://bahung.com
  • Fanpage : https://m.facebook.com/AmthanhBaHung

Ms Helen (Thuỳ Hương), Vice President - Project Director 
(hỗ trợ Dự án – Chủ đầu tư - Nhà Tổng thầu – Nhà thầu - Đại lý - Bán buôn - Partner / Freelancer)

  • Hotline: +84 919339977
  • Email 1: info@bahung.com
  • Email 2: helenvu999@gmail.com

James Dynamic, CEO 
(hỗ trợ Tư vấn Thiết kế & Tích hợp hệ thống)

  • Hotline: +84 908410817
  • Email: ceo@bahung.com

Other products from the same manufacturer

Khám phá một giải pháp thành công!

 Tìm kiếm thông tin cụ thể?  Hay Qúy đối tác muốn thảo luận về dự án của qúy vị với chúng tôi và khám phá một giải pháp thành công?  Chúng tôi rất muốn nói chuyện với bạn.  Đừng ngần ngại gọi cho chúng tôi +84919339977 hoặc để lại thông tin của bạn để chúng tôi liên hệ.